Step by Step Installing Wooden Floor

Some home improvements can change a room with the warmth, beauty, and effectiveness of new wood floors. In this article, we’ll walk you through the steps to install new wood flooring. https://gkservice.dk/ is one best installer wood flooring.

In short, to install wood flooring:

Prepare the tools and materials needed to install the wooden parquet floor. Commonly used tools include:

  • Rubber mallet
  • Measuring meter, electric drill,
  • Jig saw
  • Iron hammer
  • Dust mask
  • Pull bar
  • Guillotine,
  • Screwdriver

Materials to be prepared tailored to the needs and size of the room to be installed.

Calculate meticulously the needs of parquet, if necessary consult with us some ideal purposes to install the floor with the size.

A few days before the parquet is installed, the floor should be prepared in a smooth and smooth condition first.

Leveling the dough can use the yarn as a benchmark and weigh it first with a water hose so it has a flat height. Use a long wooden rod to help smooth the floor plastering, then rub with a wood pole until smooth and smooth.

If the stucco floor has been dry for several days, install a wide plastic, spread evenly throughout the floor surface to be installed parquet. Leave as high as 12 cm from the floor used to install Lis parquet.

Then attach a foam (layer of foam type) on it as the last layer under the wooden parquet. This layer is quite flattened on the floor.

If you have all set, open one by one wooden parcel box, check all parquet parts, especially the corner, there may be damaged.

Attach the corner of the room first, then forwarded to the right and left side. If you used to play puzzles, then the parquet flooring is almost the same as playing a puzzle. This parquet is interlocking.

The mounting pattern may use brickwork patterns (or brick-type) or other installation types.

At the edge, then measure and cut using jig saw. When you have finished installing the floor, continue by installing the trim on the edge of the wall.

The final stage in installing wooden parquet for floors is a fireplace and a locking edge that borders other spaces. You can use trims made of plastic or similar aluminum. Visit https://gkservice.dk/ for getting more information.

What is laminate Parquet?

The laminate parquet is made of several layers of material (hence the use of laminate words) that are glued together. Generally there are 4 layers of its formers.

At the bottom is a protective layer usually melamine that serves to protect wood from moisture. The top layer is the main material, usually MDF (medium density fiberboard) or HDF (high density fiberboard). This layer is a decorative material. Because MDF and HDF have a plain surface (not patterned), it takes an artificial wood motif to make the floor look like natural wood. This wood-patterned coating is usually made of resin. The top layer uses a strong transparent film and serves as a protector. with the lining of this film, laminate parquet is more scratch resistant and water resistant than solid wood parquet.

Differences parquet, flooring, or laminated.

Solid Flooring

Material for flooring made of real wood, not plywood, not HDF, nor layers. The material can be from teak wood, Mahogany, Merbau, Kruing and others.

Laminating Flooring

Materials for flooring made from wood powder are made on the board by means of a press called HDF like MDF (HDF = High Density Fiber). Then one of the surface in the laminate with similar materials of wooden plastic. So, this type is not the original wood, but the wood is copycat.

If you are looking for installer wood flooring, get in touch on https://gkservice.dk/.